Visit My Site

 

Almost everyone seems to have their own unique piece of advice about What Would Cause My Electric Water Heater to Stop Working?.

Many modern residences take advantage of an electrical water heater for their furnace, as a result of its comfort as well as simplicity of use. However, just like any other electric home appliances, issues may arise with its use, suddenly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the instance may be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a list of feasible options to your water heater problems. There are a variety of aspects that might cause many of these troubles, it could be a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the problem is, getting it dealt with must not pose way too much of a problem if you follow these steps:

 

Call A Professional:

If after changing all faulty components and resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional point of view. The problem with your heating unit could be that the hot and cold taps have actually been switched or it might be undersized for the quantity of hot water required in your house. Whatever the situation might be, a professional plumber would aid resolve the trouble.

 

Check Your Power Supply:

As fundamental as this might seem, it is extremely essential. Without sufficient power, your hot water heater will certainly not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on again. Replace any kind of busted or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you may need to examine the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open up the access panel and also press the red button for temperature reset over the thermostat. This ought to aid heat the water. Transform the circuit breaker back on as well as inspect if the trouble has actually been resolved.

 

Check the Heating Element in the Water Heater:

If it's not a power issue, then attempt looking into your burner if it is still functioning. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is faulty, replace that part and then examine whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Most of them result from small problems like a blown fuse or worn-out heating element. Replacing the faulty parts should suffice. Nonetheless, if you are still incapable to solve the issue, give a call to your nearby plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you liked our section on Hot Water Heater Repair. Thanks so much for taking the time to browse our piece of content. Enjoyed our entry? Please share it. Help others check it out. Bless you for your time. Kindly visit our site back soon.

Maintenance Sign-Up